Home & Lifestyle

5 Things To Consider When Installing A Wood Floor

Are you planning on installing new flooring in your home? If so, it is essential that you understand the proper floor installation process in order to ensure an error-free installation of your new floor. Regardless of what type of flooring you decide to install, here are 14 vital steps you should take to properly prepare your home for a floor installation. By following these steps, you will help to keep the room clean and ensure a smooth installation, allowing your family and you to enjoy beautiful new floors in no time at all! So take a few moments to read through the below-mentioned tips, and you will be well on your way to a beautiful new floor!

The first step that any floor installation professional will take is to measure the room that will be receiving the new flooring. It is important that the installers take the time to carefully measure the room to make sure that they do not miss any corners or areas that may be cut off during the installation process. This step is especially important if the room will be one that will require cutting into the sub-floor, as this can cause a great amount of bleeding and unevenness in the finished floor. It is essential that all installers take the time to measure the room before they come to your house and then leave it while they gather the needed tools and equipment.

The second step that any floor installer should take is to install the underlayment. The underlayment is used to protect the floor from moisture and bacteria, and is typically installed on top of the subfloor. In order for your underlayment to perform properly, it must be done properly and properly installed by licensed installers. Most people will just buy the standard, run-of-the-mill underlayment that comes in any home improvement store, and while this may work well enough to keep your floor dry and safe, it will do nothing to increase the quality of the install, nor will it add anything to the aesthetics of your room. If you are interested in purchasing a more unique or customized underlayment for your installation, there are a few things to keep in mind.

There are two primary installation types that people choose when installing a new floor; floating flooring, and fixed flooring. Floating floors can be easily moved if necessary and can even be installed over existing flooring without having to cut anything out. The problem with floating flooring is that it can be damaged quite easily, especially if someone should accidentally walk into the area and damage a nail or some other protruding point. Another issue that can arise with floating floors is that over time, the padding can start to wear down, especially if the area is frequently wet. Another issue that can occur is that the padding may not completely cover all of the edges of the sub-flooring, leaving portions of the new floor exposed.

If you are installing a floating floor system in an area that experiences high levels of humidity, make sure that your installer uses a rubber moisture barrier underlayment. If you plan to use an expansion gap between your floor and sub-flooring, make sure that your installer uses one of the best quality expanders on the market, as expansion gaps can easily tear the subfloor apart if they are not sealed properly. It is absolutely crucial to seal an expansion gap, and make sure that your installer uses a silicone sealant between the expanding and contracting floor. If you plan to use wood framing behind your new floor, be sure to trim the wood back flush to the floor to prevent any wood floor damage due to expansion and contraction. A floor installation professional will be able to provide you with specific details on the best way to seal your floor, if you need one hire someone from Denver flooring company.

If you plan to use plywood for the framing of your floor, make sure that the cutting area is adequately covered. Even a small amount of dust or debris in the cutting area can easily cause problems with the finishing of your floor. Also, the cutting area should be cleaned thoroughly after every floor installation to prevent dust from getting trapped in the equipment. If you do plan to use plywood, it may need to be treated with a wood preservative to keep it from drying out and becoming useless. Once you have completed your floor installation and are enjoying the benefits, you may need to install a ventilation system to help remove any excess moisture from the air.